Karas Kustoms Machined Pens Grip Section Review

Karas Kustoms makes some of my favourite machined pens, and even with all the great new machined pens in the market I still think that a Kara’s Kustoms Retrakt, Render K or Bolt are the best first machined pens to buy. They are well made, well designed, tough, and well priced. In the past year or so they’ve added a lot of new grip options to the lineup, so I thought that I’d go through the various options and review them, to help those wondering which grip option to try.

Grip options from left to right: shiny anodized fluted, matte anodized fluted, anodized rings, Cerakote “plain”, anodized speed groove, anodized MK II, Cerakote dragonskin.

Not all of the grip options nor all of the finishes are offered in all of Karas Kustoms’ pens, however, if there is a particular combination you are looking for and it isn’t currently available there’s a good chance that it will show up in a limited edition at some point. Kara’s is always experimenting with their pens, so even though you may not be able to purchase any of the specific pens shown here, you’ll likely be able to find something else just as good.

Grip options from left to right: shiny anodized fluted, matte anodized fluted, anodized rings, Cerakote “plain”, anodized speed groove, anodized MK II, Cerakote dragonskin.

The newest of Kara’s grip options are the speed grooves, the MK II and the Dragonskin. Of the three, Karas seem to be issuing more MK II and Dragonskin lately, and these two grip options are the “grippiest” of them all. If you find machined pens problematic to grip because they tend to be slippery, the Dragonskin or the MK II grip options are made for you.

From left to right: speed groove, MK II and dragonskin.

Of the older grip options, the rings seems to be offered only on the EDK, while the fluted options are available on the Bolt and the Retrakt. The fluted options provide decent enough grip, but depending on how tightly how grip the pen you may find them uncomfortable for long writing sessions. They don’t dig into your fingers, they just feel a little “off” if you use the grip of death. The rings on the EDK provide little additional grip beyond what you get from the plain anodized options. I see the rings as more of an aesthetic statement here than something that provides more traction.

From left to right: fluted with shiny anodization, fluted with matte anodization, rings, plain Cerakote and anodized speed groove grip sections.

Karas has started creating more Cerakote (a kind of durable ceramic finish) pens lately, and in general they provide a little more grip than their anodized counterparts. In terms of finish, the shiny anodization and matte anodization are almost the same in terms of grippiness, and the Cerakote is slightly better than them, but not by much. If your hands tend to sweat a lot, these aren’t the best options for you.

Plain Cerakote Bolt V2

The rings on the EDK’s grip are honestly more for aesthetics than for added grip. I like the look and it suits the EDK very much, but don’t expect it to add functionality to the pen.

EDK with a ringed grip.

The fluted grip works, although it works better on the matte finished pens than the super shiny ones. The pen won’t slip from your hand, but it may not be the most comfortable thing to write with over time (depending on your grip). It is one of the more attractive and classy grip options, particularly suited for the longer pens.

Retrakt V2 with matte anodization and a fluted grip.
Bolt V2 with shiny anodization and a fluted grip.

The Speed-Groove grip option looks very slick and is pretty slick. Buy it for the looks, not out of any expectation that it will add to the grippiness of the pen. It’s comfortable, and a bit better than the plain and ring options in term of the traction it offers, but if you have sweaty hands, this is not the grip for you.

Bolt V2 with a Speed-Groove grip

The MK II will speak to those with a penchant for militaria (the grip design is based on the US MK II grenade) and to those looking for a robust grip option. It provides the most grip and has a traditional and understated profile. For a “wilder” option with the same amount of grip, see the Dragonskin below.

Retrakt V2 with an MK II grip.

The newest grip option that Karas offer is the Dragonskin. It’s dramatic, it calls attention to itself, but it’s also comfortable to hold and provides plenty of added grip. I like the look and love using this grip, but if you want the same functionality with a more traditional look, the MK II will probably be the best option for you.

Bolt V2 Cerakote finished pen with a Dragonskin grip.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s